Paper laser cutting systems for greeting card

 2017-11-14 17:30   http://www.cnclaser.xyz    208





Optional parts of paper Laser cutting machine


1). Z-axis motorized up-down worktable.

With this device, Z-Axis worktable can move up and down automatically. With about 10 inches(20-25cm) of usable height.

2). Chuck rotary device for engraving cyliners such as bamboo, cups, etc.

3). Roller rotary device for engraving irregular cylinders such as bottle, etc.



Standard accessories will come with paper Laser cutting machine:


1). Water chiller. It is used to cool the laser tube, CW3000 model for 60W/80W, CW5200 for 100W/150W/180W.

2). Air pump or compressor. Push fumes away from the laser's focal lens; push air into the material's kerf as created by the laser beam; the air will help to cool the material. 

3). Exhaust fan. It creates an air flow to remove dust and fumes from the work area of the laser machine. 

4). Worktable. Blade worktable for hard materials such as acrylic, glass, etc. Or Honeycomb worktable for soft materials such as cloth, paper, fabric, etc.  

5). Red dot pointer. It will show you where is the laser dot.




Share